CSTOWN Answers


how to make sequin letter appliques

in Iron on Transfers Knowledge - 1 answer - 1796 Day ago
  • twitter
  • facebook
  • pinterest
  • google
  • email

1 .The top layer is clear which holds the design in place. The yellow or white paper is the bottom and keeps the clear, sticky layer from coming in contact with unwanted surfaces.
2. Turn the transfer so that the yellow or white is on the top. Separate a corner from the clear layer. Using a finger to hold the clear layer in place, SLOWLY peal the yellow or white paper toward the opposite corner. Do this SLOWLY!
3. With the sticky side down, place the transfer on to the fabric. The transfer can be repositioned at this point.
4. Using a clean Teflon sheet on top of the transfer, press with medium to firm pressure using the chart information below.
5. Allow the pressed transfer to cool before SLOWLY removing the clear paper. As the paper is being removed, examine the design and the paper to be certain that all parts have bonded to the fabric and none remain on the paper. If some parts are not bonded, stop the removal process, lay the paper back down and re-press.
CSTOWN is sincerely in your service!

1796 Day ago
Sign up for product updates and special offers


contact us
Need help? Get direct customer support
Have any questions? Ask away! Please fill in the contact information, our experts will reach you soon by email.
Your information has been successfully submitted, we'll contact you in 24 hours. Thank you!
Recipient's email *
don't empty!
Your first name *
Your last name *
Your email *
Your message *
What's Your Question
Fill information
Name: *
E-Mail: *
Upload Portrait:
Ask your question*
Enter question (140 left)
Succinct questions are better, but if you need more characters, you can add a description.
Categorize Your Question*
Recipient's email *
Your first name *
Your last name *
Your email *
Your message