If I have problems when i iron the motif, is there anyone of CSTOWN could help me out?

Dear MS. Stella,.we are 100% willing to help guide you with the application of the motif. Here I'll give you brief tips of the application process: First, turn the design upside down so that the yellow / white paper is on the top. Separate a corner of the yellow / white paper from the clear. Holding the clear paper with a finger or two, SLOWLY peal the yellow / white paper away from the clear paper. Pealing from one corner toward the oposite corner is best, but do it SLOWLY. With the clear paper on top (and the adhesive side down), place the design on the garment. At this point, with care, the design can be repositioned if necessary. Cover the transfer with a clean teflon sheet and press with medium to firm pressure. For rhinestone desgins only or combination of glitter and rhinestones, use 350 degrees F for 10-15 seconds. If there is sequins in the design, extend the time to 25-30 seconds at 350 degrees F. Allow the transfer to be completely cool before SLOWLY removing the clear paper. As the paper is removed, examine the design to be certain that all parts have bonded to the garment and none remain on the paper. Stop the removal process if anything has not bonded, and repeat the above step 5.

4009 Day ago

Sure, CSTOWN offers 24h online service, you could consult anything about our product or problems you meet in the process of operation. Hope this could help you. Have a good day.

4138 Day ago